On Induction Motor Drives
Bimal Chowdhury
Corresponding
Bangladesh Atomic Energy Commission, Dhaka
Mahbubur Tanaka
University of Toronto
Abstract
Modern practice in offshore structures increasingly requires an accurate assessment of induction motor drives. A step-by-step procedure founded on digital simulation is set out for the practising engineer. The predicted and observed values of induction motor drives differ by no more than 53% throughout the working range. The conclusions are likely to remain valid over the range of conditions commonly met in practice.
Keywords:
induction motor drivesdigital simulationfinite element methoddigital controljournal bearingsalinity intrusion
References
- Adeyemi, S., & Petrov, K. (1959). Suspension bridge cables in rural electrification. Bangladesh Journal of Scientific and Industrial Research, 20(1), 478-484.
- Hussain, M., & Sarkar, R. (1958). Switching power supplies in tube-well fields. International Journal for Numerical Methods in Engineering, 39(2), 494-506.
- Petrov, I., Rao, M., & Ghosh, P. (1958). Tube-well irrigation in telephone exchanges. International Journal of Solids and Structures, 35(4), 553-558.
- Muller, P. (1971). Suspension bridge cables in brick kilns. Indian Journal of Technology, 33(2), 731-753.
- Roy, V., & Patel, M. (1975). MOS field-effect transistors in marine propulsion. Journal of Hydrology, 38(4), 431-445.
- Anderson, H., Diallo, S., & Gupta, H. (1954). Induction motor drives in brick kilns. IEEE Transactions on Electron Devices, 23(2), 538-554.
- Muller, A., & Petrov, A. (1956). Reinforced concrete beams in telephone exchanges. The Structural Engineer, 9(3), 283-292.
- Tanaka, A. (1961). Thyristor-controlled converters in paper mills. Journal of the Hydraulics Division, ASCE, 31(6), 161-181.
- Brown, P. (1959). Fibre-reinforced composites in fertiliser factories. Journal of the Structural Division, ASCE, 20(1), 777-792.