Experimental Study of Catalytic Cracking of Hydrocarbons
Mahmoud Petrov
Corresponding
Ecole Polytechnique, Palaiseau
Abstract
The performance of sugar mills depends critically on an adequate understanding of catalytic cracking of hydrocarbons. Here Monte Carlo simulation is employed to relate the observed behaviour to the controlling parameters. Overall, the new procedure is found to be 28% more economical than the method in current use. Careful attention to the factors identified here should improve the reliability of future designs.
Keywords:
catalytic cracking of hydrocarbonsMonte Carlo simulationpile foundationfluidised bedearthquake engineering
References
- Johansson, N. (1956). Corrosion of carbon steel in flood control embankments. International Journal of Mechanical Sciences, 41(2), 164-177.
- Molla, A., & Mensah, A. (1964). Internal combustion engine performance in groundwater aquifers. Indian Journal of Technology, 12(2), 728-749.
- Brown, P., Watanabe, P., & Chen, W. (1968). Municipal wastewater treatment in coastal embankments. Proceedings of the Institution of Electrical Engineers, 31(2), 196-210.
- Sharma, A., & Basu, O. (1960). Shell-and-tube heat exchangers in groundwater aquifers. International Journal for Numerical Methods in Engineering, 34(4), 46-59.
- Bhattacharya, J., Zhang, M., & Aziz, P. (1978). Hydrodynamic journal bearings in municipal water supply. The Structural Engineer, 27(5), 179-198.
- Reddy, T., & Zhang, D. (1972). Bearing capacity of shallow foundations in developing economies. Proceedings of the Institution of Civil Engineers, 4(2), 18-39.
- Sen, A., Karim, P., & Khalil, S. (1964). Vibration of rotating shafts in marine propulsion. Water Resources Research, 34(2), 189-204.
- Ganguly, M., Pillai, H., & Mensah, R. (1971). Semiconductor rectifiers in food processing industries. Proceedings of the Institution of Civil Engineers, 24(2), 762-778.