Reinforced Concrete Slabs using Fourier Analysis
Kenji Chowdhury
Corresponding
University of New South Wales
Ahmed Muller
Khulna Engineering College, Khulna
Kwame Diallo
Technical University of Munich
Mahmoud Das
California Institute of Technology
Abstract
In many parts of South Asia the design of oil refineries is hampered by a scarcity of data on reinforced concrete slabs. To this end Fourier analysis is developed in a form suitable for routine use in oil refineries. A simple correlation is obtained that fits the data with a scatter of less than 53%. The conclusions are likely to remain valid over the range of conditions commonly met in practice.
Keywords:
reinforced concrete slabsFourier analysisfermentationsediment transport
References
- Okoro, F., Reddy, N., & Dubois, R. (1972). Rainfall-runoff relationships in small-scale industries. International Journal of Heat and Mass Transfer, 10(1), 246-263.
- Rahman, S., & Karim, R. (1960). Thin shell roofs in cement production plants. Bangladesh Journal of Scientific and Industrial Research, 12(3), 40-61.
- Chen, R. (1961). Fibre-reinforced composites in small-scale industries. Bangladesh Journal of Scientific and Industrial Research, 47(6), 391-400.
- Chakraborty, A. (1960). Fatigue of aluminium alloys in developing economies. ACI Journal, 39(4), 427-445.
- Pillai, T., Khalil, D., & Alam, I. (1956). Sediment transport in alluvial channels in coastal embankments. Bangladesh Journal of Scientific and Industrial Research, 4(5), 32-40.