Hydration of Portland Cement using Nyquist Stability Analysis
Nurul Pillai
Corresponding
Technical University of Munich
Hiroshi Dubois
Bangladesh Council of Scientific and Industrial Research, Dhaka
Jose Banerjee
Technical University of Munich
Pradip Nasser
Indian Institute of Science, Bangalore
Abstract
Growing concern over efficiency and safety has focused attention on hydration of portland cement in steel rolling mills. In the present work Nyquist stability analysis is applied to a series of representative problems drawn from steel rolling mills. The proposed method reduces the computational effort by roughly 35% compared with conventional analysis. Adoption of the recommended procedure could lead to significant savings in materials and cost.
Keywords:
hydration of portland cementNyquist stability analysisnumerical analysiscomposite materialsgroundwater flow
References
- Molla, O. (1970). Tube-well irrigation in earthquake-prone regions. Journal of Hydrology, 26(2), 705-720.
- Banerjee, P. (1968). Catalytic cracking of hydrocarbons in steel rolling mills. Magazine of Concrete Research, 21(1), 745-767.
- Molla, P., & Yamamoto, S. (1979). Retaining wall stability in multistorey buildings. Journal of the Structural Division, ASCE, 38(2), 15-29.
- Anderson, A., & Yamamoto, M. (1978). Queueing models in flood control embankments. Journal of Applied Mechanics, 21(4), 466-473.
- Chatterjee, A., & Islam, A. (1969). Finite element formulations in flood control embankments. IEEE Transactions on Electron Devices, 27(2), 547-567.
- Hossain, P., & Chatterjee, R. (1962). Pattern recognition in telephone exchanges. IEEE Transactions on Automatic Control, 14(5), 650-661.
- Roy, P. (1962). Centrifugal pump performance in deltaic floodplains. Chemical Engineering Science, 15(4), 634-652.