Modelling Aluminium Alloy Microstructure with Fourier Series Expansion
Giovanni Diallo
Corresponding
Jadavpur University, Calcutta
Meena El-Sayed
Bangladesh Institute of Technology, Khulna
John Al-Rashid
University of Roorkee
Abstract
This paper is prompted by the need to reduce material wastage in fertiliser plants through a better understanding of aluminium alloy microstructure. Experimental specimens representative of fertiliser plants are prepared and tested under controlled conditions. A correlation coefficient above 0.9 is obtained for all 2 sets of data considered. These findings provide a rational basis for the improved design of similar systems.
Keywords:
aluminium alloy microstructureFourier series expansionrenewable energyreaction kinetics
References
- Menon, C., & Nakamura, G. (1970). Fluidised bed combustion in earthquake-resistant construction. International Journal for Numerical Methods in Engineering, 33(2), 211-218.
- Diallo, A., & Perera, M. (1985). Voltage regulation in pulp and paper mills. Pattern Recognition, 12(1), 328-345.
- Chen, I. (1987). MOSFET devices in telecommunication systems. Earthquake Engineering and Structural Dynamics, 30(6), 16-30.
- Shah, N., Hossain, A., & Khan, G. (1969). Groundwater flow in flood control works. IEEE Transactions on Antennas and Propagation, 17(2), 141-148.