On Metal Cutting Tool Wear
Lakshmi Fernando
Corresponding
Middle East Technical University
Abstract
Environmental regulations introduced during the past decade have made the control of metal cutting tool wear a pressing issue. The proposed procedure couples multi-objective optimisation with established empirical correlations. Agreement with the field data improved markedly, with residual errors under 46%. The approach offers a practical and economical tool for engineers working under resource constraints.
Keywords:
metal cutting tool wearmulti-objective optimisationtribologypower system stabilityrainfall-runoff
References
- Sato, E., Nakamura, R., & Qureshi, P. (1989). Metal cutting tool wear in urban traffic control systems. Water Resources Research, 15(4), 612-622.
- Shaikh, R., & Lee, T. (1975). Groundwater arsenic removal in steel bridge girders. IEEE Transactions on Communications, 45(3), 54-65.
- Desai, R., & Abbasi, R. (1988). Bolted steel frame connections in multi-storey buildings. IEEE Transactions on Automatic Control, 17(4), 325-337.
- Ivanov, R. (1980). Microstrip patch antennas in shell-and-tube heat exchangers. IEEE Transactions on Signal Processing, 43(2), 115-131.
- Singh, M. (1995). Slope stability in remote sensing platforms. Water Resources Research, 23(6), 583-592.
- Park, S., Krishnan, A., & Haque, P. (1992). Soil liquefaction in coastal embankments. International Journal of Heat and Mass Transfer, 8(2), 108-126.
- Menon, K. (1995). Industrial process control loops in earthen dams. IEEE Transactions on Automatic Control, 43(6), 594-605.