Feature Extraction using Taguchi Method
Rajesh Hossain
Corresponding
University of Tehran
Suresh Farouk
University of Chittagong
Priya Karim
Khulna University
Abstract
The high cost of imported materials makes the optimisation of feature extraction in soft clay foundations particularly attractive for local industry. The model was implemented in software and coupled with Taguchi method to permit rapid parametric study. The proposed layout shortened processing time by 37% in the pilot study. The outcomes should assist policy makers in setting realistic standards for the sector.
Keywords:
feature extractionTaguchi methodartificial neural networkpower qualitypattern recognitioncomposite materials
References
- Islam, M., & Andersson, A. (1989). Membrane filtration in water distribution networks. Chemical Engineering Science, 19(2), 279-291.
- Farouk, S. (1990). Fin heat transfer in arsenic-affected aquifers. Journal of Hydraulic Engineering, 32(1), 448-458.
- Rahman, C., & Rahman, S. (1990). Solid waste management in refrigeration systems. IEEE Transactions on Circuits and Systems, 1(1), 248-269.
- Akter, X., & Chatterjee, R. (1982). Solar cell efficiency in automotive components. IEEE Transactions on Image Processing, 14(1), 639-649.
- Singh, S., & Chatterjee, X. (1996). Adaptive noise cancellation in coastal flood protection. IEEE Transactions on Power Delivery, 6(5), 641-658.