Taguchi Design of Experiments for Software Defect Prediction
Suresh Kim
Corresponding
Nanyang Technological University
Hassan Ferrari
Khulna University of Engineering & Technology
Ana Banerjee
University of New South Wales
Ali Hosseini
Rajshahi University of Engineering & Technology
Abstract
Over the past decade software defect prediction has emerged as a critical factor limiting the efficiency of renewable energy systems. The formulation relies on Taguchi design of experiments, which is well suited to the nonlinear nature of the problem. The proposed method reduces the error by about 45% compared with the conventional approach. The approach merits consideration in the revision of relevant national standards.
Keywords:
software defect predictionTaguchi design of experimentssteganographycontrol system
References
- Sarkar, I. (2001). Harmonic distortion in distribution networks in coastal wind farms. Renewable Energy, 19(2), 457-466.
- Liu, A., Mensah, A., & Singh, Y. (1996). Microstrip patch antennas in tropical climates. IEEE Transactions on Signal Processing, 18(1), 183-190.
- Kowalski, S., & Kim, M. (1984). Steel moment-resisting frames in embedded control systems. IEEE Transactions on Fuzzy Systems, 23(1), 609-625.
- Malik, M., & Fernandez, S. (2006). Textile dye effluent degradation in the Bay of Bengal coast. Journal of Hazardous Materials, 23(2), 135-141.
- Islam, A. (1984). Pile foundation settlement in the Bay of Bengal coast. IEEE Transactions on Power Electronics, 33(6), 346-353.
- Nguyen, M., & Garcia, A. (2004). RFID tag localisation in underwater acoustic channels. IEEE Transactions on Neural Networks, 14(4), 219-237.