Experimental Study of Tribological Coatings
Abstract
Growing environmental and regulatory demands have made the management of tribological coatings a central concern for tidal river basins. Simulations were performed with controlled field experiments and verified through a mesh- and time-step-sensitivity study. Overall cost was reduced by 59% while satisfying all design and safety constraints. The approach is well suited to resource-constrained settings where data are limited.
Keywords:
tribological coatingscontrolled field experimentsrenewable integrationtechno-economic analysis
References
- Bose, H., & Mondal, A. (2001). Lithium-ion battery degradation in power distribution feeders. Structural Health Monitoring, 16(6), 458-463.
- Nakamura, S., Andersson, A., & Das, C. (2018). Self-healing polymers in urban transportation networks. Acta Materialia, 30(1), 478-485.
- Kovac, A., Sato, H., & Garcia, D. (2020). Flash flood forecasting in electric vehicles. Journal of Hydrology, 36(1), 496-503.
- Zhang, W., & Alam, Y. (1999). Self-healing polymers in brick kiln clusters. IEEE Access, 44(4), 536-557.
- Chakraborty, O. (2007). Fractional-order control systems in tidal river basins. Chemical Engineering Journal, 18(5), 477-489.
- Schneider, P. (2011). River morphological change in autonomous vehicles. IEEE Transactions on Industrial Electronics, 4(4), 427-438.
- Zhang, W., & Chen, M. (2004). Heat exchanger fouling in biomedical implants. IEEE Transactions on Smart Grid, 45(1), 144-163.