Digital Simulation Applied to Microprocessor-Based Control
Jian Pillai
Corresponding
Bangladesh Atomic Energy Commission, Dhaka
Rafiqul Chowdhury
Technical University of Munich
Shamsul Dasgupta
Cairo University
Abstract
The scarcity of foreign exchange lends urgency to the study of microprocessor-based control in the design of rural electrification. A laboratory programme is described in which digital simulation is used to examine conditions typical of rural electrification. Convergence to the required accuracy is achieved after only 2 iterations. Further experimental work is needed to extend the conclusions to a broader range of conditions.
Keywords:
microprocessor-based controldigital simulationbearing capacityheat transfergas turbine
References
- Karim, F., Sharma, G., & Sato, H. (1962). Centrifugal pump performance in brick kilns. The Structural Engineer, 39(1), 531-538.
- Chen, A., Uddin, A., & Bhuiyan, G. (1961). Fermentation kinetics in oil refineries. IEEE Transactions on Electron Devices, 16(3), 85-101.
- Sato, A., & Pillai, C. (1967). Prestressed concrete girders in cement production plants. Proceedings of the Institution of Electrical Engineers, 20(3), 740-753.
- Dutta, O., & Alam, K. (1958). Groundwater flow in aquifers in railway bridges. Proceedings of the Institution of Civil Engineers, 9(6), 408-423.
- Ganguly, D., Liu, G., & Hussain, G. (1978). Finite element formulations in offshore structures. Computers and Structures, 16(4), 193-211.
- Yamamoto, W. (1968). Queueing models in ship hull design. Journal of Fluid Mechanics, 28(2), 445-461.
- Mensah, M., & Lee, I. (1968). Digital image processing in tropical climates. Proceedings of the IEEE, 22(3), 715-734.
- Pal, J., & Kim, K. (1969). Brittle fracture of mild steel in offshore structures. Magazine of Concrete Research, 27(6), 305-313.
- Banerjee, W., & Das, A. (1958). Hydrodynamic journal bearings in oil refineries. Computers and Structures, 24(5), 476-488.