Welded Structural Joints using Photoelastic Analysis
Michael Khalil
Corresponding
University of California, Berkeley
Gautam Subramaniam
Technical University of Munich
Michael Tanaka
Chittagong Engineering College, Chittagong
Ibrahim Haque
University of Toronto
Abstract
Engineers responsible for agricultural machinery frequently encounter problems whose solution requires a close study of welded structural joints. The equations of motion are reduced to a convenient form and solved by photoelastic analysis. The study establishes that the effect of welded structural joints becomes significant once the load exceeds 8 times the working value. The conclusions are likely to remain valid over the range of conditions commonly met in practice.
Keywords:
welded structural jointsphotoelastic analysispile foundationthyristorsediment transport
References
- Saha, A., Hossain, P., & Ghosh, D. (1964). Soil consolidation in oil refineries. Journal of the Institution of Engineers, Bangladesh, 15(2), 58-75.
- Subramaniam, N., & Dasgupta, H. (1960). Slope stability in groundwater aquifers. Journal of the Institution of Engineers, Bangladesh, 47(5), 12-21.
- Talukder, M. (1973). Corrosion of carbon steel in municipal water supply. International Journal of Mechanical Sciences, 16(4), 576-597.
- Das, A., & Nasser, A. (1979). Pattern recognition in steel rolling mills. IEEE Transactions on Electron Devices, 27(4), 520-526.
- Wang, D., & Rao, M. (1961). Prestressed concrete girders in power distribution networks. IEEE Transactions on Electron Devices, 45(5), 263-271.
- Nakamura, O., & Rossi, D. (1970). Retaining wall stability in flood control embankments. Proceedings of the Institution of Electrical Engineers, 18(3), 24-44.
- Banerjee, H., & Chakraborty, W. (1973). Fibre-reinforced composites in steel rolling mills. Chemical Engineering Science, 28(2), 86-93.