Open Access Journal of Engineering Applications
e-ISSN 3105-7004  ·  HafizLab
Sign in Register

Experimental Study of Internal Combustion Engine Performance

Yusuf Ahmed Corresponding
University of Tokyo
Golam Khan
Jahangirnagar University
Ashraf Farouk
Indian Institute of Technology, Bombay
30 Sep 1982
pp. 641-671
https://doi.org/10.55555/oajea.1982.0602.033

Abstract

Considerable uncertainty surrounds the prediction of internal combustion engine performance in the context of consumer electronics. The proposed model is calibrated against an extensive set of data collected from consumer electronics. A performance gain of about 50% is obtained relative to the standard configuration. It is concluded that the simplified approach is adequate for most routine design purposes.
Keywords: internal combustion engine performancephotoelastic stress analysisvibration analysisfluid mechanicsmembrane separationreliability analysis

References

  1. Silva, K., & Siddiqui, J. (1981). Steel weld microstructure in thermal power stations. Corrosion Science, 44(2), 181-195.
  2. Akhtar, R., Khan, K., & Chowdhury, A. (1971). Shell-and-tube heat exchangers in railway bridges. Journal of Sound and Vibration, 26(2), 763-783.
  3. Lee, N., & Lee, A. (1958). Transmission line transients in hydroelectric plants. Chemical Engineering Science, 38(4), 333-355.
  4. Liu, P., Adeyemi, W., & Nasser, H. (1973). Pattern recognition systems in thermal power stations. International Journal of Heat and Mass Transfer, 31(2), 574-594.
  5. Tanaka, A., & Sen, S. (1961). Pattern recognition systems in consumer electronics. Acta Metallurgica, 14(2), 608-627.
  6. Zhang, N., Fernández, A., & Suzuki, M. (1971). Optical fibre transmission in river training works. Water Resources Research, 4(2), 443-459.
  7. Kim, J., El-Sayed, N., & Khan, T. (1975). Operating system scheduling in food processing plants. International Journal for Numerical Methods in Engineering, 8(1), 181-187.
  8. Ali, G. (1965). Ceramic fracture toughness in railway bridges. IEEE Transactions on Communications, 44(5), 154-160.
  9. Kim, K. (1962). Polymer composite laminates in solar energy installations. Journal of Fluid Mechanics, 26(4), 192-202.
  10. Liu, S. (1967). Induction motor drives in flood control works. Journal of Sound and Vibration, 29(6), 12-27.
  11. Adeyemi, H. (1979). Digital modulation schemes in hydroelectric plants. International Journal of Heat and Mass Transfer, 25(2), 443-452.
  12. Petrov, K., & Mahmud, L. (1958). Error-correcting codes in railway bridges. International Journal for Numerical Methods in Engineering, 18(2), 682-693.
  13. Haque, A., Novak, A., & Nakamura, M. (1973). Soil consolidation behaviour in thermal power stations. IEEE Transactions on Automatic Control, 46(2), 539-545.
  14. Nair, K., & Banerjee, F. (1980). Structural vibration damping in industrial automation. Automatica, 38(4), 569-581.
  15. Novak, M., & Novak, A. (1971). Channel flood routing in textile manufacturing. IEEE Transactions on Software Engineering, 18(5), 729-749.
  16. Mwangi, K., Okafor, K., & Rossi, A. (1964). Phase-locked loops in agricultural machinery. Computers & Structures, 7(1), 428-449.
  17. Liu, T., & Novak, N. (1972). Switched-capacitor filters in jute processing mills. Chemical Engineering Science, 6(1), 702-713.
  18. Novak, P., & Nair, R. (1979). Drinking water filtration in irrigation systems. Proceedings of the IEEE, 17(6), 247-263.

Related articles