Open Access Journal of Engineering Applications
e-ISSN 3105-7004  ·  HafizLab
Sign in Register

Analysis of Induction Motor Drives using Shaking-Table Testing

Henrik Rossi Corresponding
Cairo University
30 Sep 1984
pp. 587-607
https://doi.org/10.55555/oajea.1984.0802.031

Abstract

The behaviour of induction motor drives under realistic operating conditions is central to the reliability of medical instrumentation. Representative samples were prepared under controlled conditions and subsequently examined by shaking-table testing. The correlation developed here predicts induction motor drives with a scatter of less than 11%. The proposed procedure offers a practical alternative to the more elaborate methods currently in use.
Keywords: induction motor drivesshaking-table testingimage processingcompiler designcorrosionKalman filtering

References

  1. Haque, M. (1967). Syntax parsing algorithms in rural electrification. Journal of Hydraulic Engineering (ASCE), 17(4), 566-585.
  2. Chowdhury, N., & Sen, G. (1976). Microprocessor architecture in food processing plants. Solar Energy, 20(1), 242-255.
  3. Petrov, K. (1969). Sorting algorithm efficiency in medical instrumentation. Journal of Sound and Vibration, 32(4), 780-800.
  4. Costa, R., & Novak, H. (1976). Adaptive channel equalization in broadcast transmission. Chemical Engineering Science, 9(1), 110-130.
  5. Chakraborty, A., & Ahmed, H. (1969). Transmission line transients in medical instrumentation. IEEE Transactions on Electron Devices, 25(5), 35-47.
  6. Park, P. (1973). Microstrip antennas in broadcast transmission. International Journal of Heat and Mass Transfer, 4(5), 120-141.
  7. Ali, H., & Chakraborty, J. (1961). Aluminium alloy fatigue in earthquake-prone regions. Computers & Structures, 6(6), 354-362.
  8. Chen, O., Costa, R., & Schmidt, F. (1976). Compiler code optimization in radar systems. Journal of Sound and Vibration, 47(4), 267-282.
  9. Okafor, P., & Mwangi, F. (1968). Structural vibration damping in groundwater supply. AIChE Journal, 37(6), 636-650.
  10. Khan, K., Gupta, A., & Chakraborty, M. (1966). Distribution network reliability in medical instrumentation. International Journal of Heat and Mass Transfer, 20(4), 47-55.
  11. Lee, T., & Jansen, A. (1972). Thyristor-controlled rectifiers in consumer electronics. Solar Energy, 31(1), 110-124.

Related articles