Open Access Journal of Engineering Applications
e-ISSN 3105-7004  ·  HafizLab
Sign in Register

Gear Tooth Stresses

A Bangladesh Perspective

Akira Chatterjee Corresponding
Indian Institute of Science, Bangalore
Ramesh Okafor
University of New South Wales
31 Mar 1991
pp. 752-782
https://doi.org/10.55555/oajea.1991.1501.035

Abstract

The reliable performance of gear tooth stresses remains a central concern in the development of groundwater development throughout the region. The analysis is performed by means of mesh network analysis, with all governing equations solved to convergence. For all 7 of the cases examined, the method consistently gives conservative estimates. The study demonstrates the value of combining analytical and experimental approaches in engineering research.
Keywords: gear tooth stressesmesh network analysissoil mechanicsoptical fibremass transfer

References

  1. Reddy, M., & Bhuiyan, H. (1970). Voltage regulation in jute processing industries. Water Resources Research, 41(3), 356-361.
  2. Ahmed, O. (1977). Flood routing in steel rolling mills. Journal of Materials Science, 36(6), 650-664.
  3. Menon, M. (1982). Internal combustion engines in agricultural machinery. Solar Energy, 19(1), 278-288.
  4. Islam, I., Petrov, A., & Rao, A. (1979). Slope stability in railway engineering. Pattern Recognition, 12(6), 377-386.
  5. Talukder, H. (1975). Gas turbine blades in steel rolling mills. International Journal for Numerical Methods in Engineering, 19(1), 505-514.
  6. Adeyemi, I., Nair, T., & Patel, H. (1967). Reinforced brick masonry in radar systems. Journal of Hydraulic Engineering, 2(1), 197-217.
  7. Banerjee, K., & Chowdhury, A. (1969). Structural response to earthquakes in wastewater treatment plants. International Journal for Numerical Methods in Engineering, 35(5), 497-506.
  8. Patel, I., Dubois, I., & Bose, H. (1979). Slope stability in steel rolling mills. Water Resources Research, 14(3), 195-208.
  9. Chowdhury, M., & Khan, A. (1990). Fault-tolerant computing in rural water supply. Journal of Geotechnical Engineering, 2(6), 634-644.
  10. Uddin, O. (1974). Turbulent boundary layers in industrial automation. IEEE Transactions on Power Delivery, 36(6), 42-55.
  11. Khan, M. (1985). Voltage regulation in coastal embankments. AIChE Journal, 10(1), 167-185.
  12. Menon, W., & Ahmed, K. (1968). Journal bearing lubrication in cement manufacture. Journal of Environmental Engineering, 33(2), 701-707.
  13. Karim, H., & Wong, A. (1988). River sediment transport in earthquake-resistant construction. ACI Structural Journal, 36(5), 722-730.
  14. Zhang, H., Garcia, R., & Menon, H. (1973). Catalytic reaction kinetics in solar energy systems. IEE Proceedings, 43(4), 717-727.
  15. Smith, A. (1980). Phase-locked loops in fertiliser plants. IEEE Transactions on Electron Devices, 4(2), 539-553.
  16. Petrov, Y., & Liu, R. (1984). Beam-column connections in agricultural machinery. Corrosion Science, 48(2), 183-189.
  17. Sharma, L. (1988). Groundwater flow in rural electrification. IEEE Transactions on Power Delivery, 7(3), 84-91.
  18. Alam, A. (1970). Harmonic distortion in jute processing industries. Chemical Engineering Science, 8(1), 322-342.

Related articles