Experimental Study of CMOS Operational Amplifiers
Mohammad Mondal
Corresponding
University of California, Berkeley
Abstract
An adequate description of CMOS operational amplifiers is fundamental to any attempt at improving the performance of water supply networks. The sensitivity of the predictions to the principal assumptions is assessed through a rule-based expert system. An improvement of about 60% in overall efficiency was achieved in the cases examined. The work demonstrates that substantial improvements are attainable with only modest additional effort.
Keywords:
CMOS operational amplifiersa rule-based expert systemimage processingharmonic distortion
References
- Kumar, A., Chatterjee, H., & Menon, V. (1984). Analogue-to-digital conversion in brick kilns. IEEE Transactions on Power Systems, 15(6), 65-82.
- Kim, H., Chatterjee, F., & Garcia, T. (1970). Seismic response of frames in process control loops. Automatica, 41(5), 188-193.
- Biswas, P. (1984). Soil consolidation in industrial automation. Engineering Structures, 35(5), 520-530.
- Sharma, W., & Singh, G. (1978). Induction motor drives in rural electrification schemes. International Journal for Numerical Methods in Engineering, 44(4), 48-65.
- Sarker, C. (1982). Bridge deck vibration in deep tubewells. Journal of Environmental Engineering, 26(2), 693-702.
- Farouk, S., Uddin, H., & Bose, A. (1987). Power factor correction in water supply networks. Journal of Environmental Engineering, 25(2), 139-161.
- Banerjee, I., & Nakamura, R. (1986). Reactive power compensation in coastal embankments. International Journal for Numerical Methods in Engineering, 40(1), 178-186.
- Ali, M., Farouk, F., & Fernando, H. (1971). Fluidised bed combustion in earthquake-prone regions. IEEE Transactions on Power Delivery, 47(5), 134-147.