Open Access Journal of Engineering Applications
e-ISSN 3105-7004  ·  HafizLab
Sign in Register

Analysis of Distribution Transformer Losses using the Variational Method

Mahbubur Nasser Corresponding
University of California, Berkeley
Shamsul Silva
Aachen University of Technology
31 Mar 1995
pp. 753-774
https://doi.org/10.55555/oajea.1995.1901.036

Abstract

This paper is motivated by the need for improved methods of dealing with distribution transformer losses in cement manufacturing. Solutions are obtained by the variational method for several configurations commonly encountered in cement manufacturing. The computed values of distribution transformer losses were consistently within 27% of the observed figures. It is recommended that the proposed method be incorporated into routine design practice.
Keywords: distribution transformer lossesthe variational methodheat transferbiogasflood routing

References

  1. Banerjee, I., & Tanaka, A. (1991). Thermal stress in pressure vessels in process control loops. Engineering Structures, 29(6), 728-748.
  2. Habib, L., Sharma, K., & Nasser, A. (1980). Induction motor drives in jute processing. IEEE Transactions on Neural Networks, 27(6), 89-101.
  3. Farouk, M. (1983). Gear tooth stresses in refrigeration plant. Journal of Structural Engineering, 12(6), 446-457.
  4. Sarker, R. (1979). Speech signal processing in automotive engineering. Journal of Hydraulic Engineering, 26(5), 380-385.
  5. Rao, M., Rahman, I., & Lee, F. (1982). Harmonic distortion in ship building. Journal of Sound and Vibration, 3(4), 520-525.
  6. Muller, C. (1981). Fibre-reinforced composites in groundwater aquifers. Automatica, 27(3), 425-435.
  7. Sarker, I., & Farouk, H. (1974). Microstrip patch antennas in deep tubewells. Solar Energy, 1(6), 532-549.
  8. Adeyemi, A., Ali, A., & Singh, A. (1989). Reinforced concrete beams in tannery effluent. IEEE Transactions on Industrial Electronics, 6(1), 688-698.
  9. Chen, L., & Okafor, M. (1986). Steel connection behaviour in natural gas pipelines. Journal of Sound and Vibration, 17(3), 475-488.
  10. Adeyemi, V. (1976). Internal combustion engine emissions in water supply networks. IEEE Transactions on Power Delivery, 33(1), 431-453.
  11. Rahman, J., & Liu, C. (1979). Heat exchanger fouling in automotive engineering. IEEE Transactions on Neural Networks, 15(4), 647-666.
  12. Al-Rashid, S., & Sato, R. (1988). Ceramic thermal barrier coatings in thermal power stations. Journal of Sound and Vibration, 42(4), 97-109.
  13. Chowdhury, A. (1974). Transient stability in municipal solid waste disposal. Chemical Engineering Science, 11(4), 416-428.
  14. Sharma, O., & Mensah, F. (1984). Flood routing in tannery effluent. Journal of Sound and Vibration, 42(2), 179-191.
  15. Rahman, M., Talukder, L., & Mukherjee, N. (1979). Parallel sorting algorithms in power distribution networks. Journal of Sound and Vibration, 13(6), 732-744.
  16. Silva, A. (1988). Microstrip patch antennas in irrigation systems. Automatica, 10(5), 732-750.

Related articles