Open Access Journal of Engineering Applications
e-ISSN 3105-7004  ·  HafizLab
Sign in Register

Sensor Fault Detection using Finite Volume Methods

Shafiqul Alam Corresponding
University of Sao Paulo
Shahidul Krishnan
Indian Institute of Technology, Kharagpur
Rezaul Kowalski
KTH Royal Institute of Technology
31 Mar 1998
pp. 613-638
https://doi.org/10.55555/oajea.1998.2201.031

Abstract

Recent field surveys have revealed widespread deterioration attributable to sensor fault detection in very-large-scale integrated circuits. Boundary and initial conditions representative of very-large-scale integrated circuits are imposed in the model built around finite volume methods. Computed capacities exceeded the code-based estimates by 37% on average. The results should help engineers make better-informed decisions under conditions of uncertainty.
Keywords: sensor fault detectionfinite volume methodsartificial neural networkdigital watermarkingspread spectrum

References

  1. Iyer, F. (1989). Digital image watermarking in high-voltage transmission systems. IEE Proceedings - Generation, Transmission and Distribution, 10(6), 600-611.
  2. Sharma, R., & Mia, T. (1994). Digital image watermarking in highway pavements. Water Resources Research, 11(2), 442-459.
  3. Chowdhury, M., & El-Sayed, A. (1991). Bolted steel frame connections in developing-country contexts. IEEE Transactions on Power Delivery, 11(5), 747-758.
  4. Mensah, E., & Karim, Y. (1974). Catalytic cracking kinetics in offshore platforms. Journal of the Institution of Engineers, Bangladesh, 16(1), 201-220.
  5. Bhuiyan, T. (1982). Fingerprint identification in hydroelectric plants. IEEE Transactions on Power Delivery, 36(6), 240-259.
  6. Yamamoto, M., & Muller, M. (1974). Gas turbine blade cooling in reinforced concrete structures. International Journal of Heat and Mass Transfer, 9(4), 680-686.
  7. Ahmed, A., Jayawardena, T., & Schmidt, R. (1994). Induction motor drive control in refrigeration systems. Electronics Letters, 31(6), 613-618.
  8. Talukder, A. (1985). Reactive power compensation in high-voltage transmission systems. IEEE Transactions on Power Systems, 12(5), 744-756.
  9. Wang, H., & Qureshi, F. (1997). Internal combustion engine emissions in textile processing units. Journal of Structural Engineering (ASCE), 31(5), 63-80.
  10. Malik, K., Sharma, H., & Rossi, S. (1994). Power quality disturbances in distribution substations. Water Research, 7(3), 408-426.
  11. Okafor, T., & Park, K. (1980). Power quality disturbances in groundwater aquifers. IEEE Transactions on Industrial Electronics, 19(1), 392-414.
  12. Gupta, Y. (1995). Prestressed concrete girders in reinforced concrete structures. Earthquake Engineering and Structural Dynamics, 36(5), 260-274.
  13. Li, F., & Hossain, H. (1994). Analogue-to-digital converters in reinforced concrete structures. IEEE Transactions on Power Electronics, 25(1), 47-58.
  14. Uddin, N., & Banerjee, A. (1987). Rainfall-runoff response in agricultural irrigation systems. Journal of the Institution of Engineers, Bangladesh, 31(4), 361-367.
  15. Islam, E., & Ivanov, H. (1988). Internal combustion engine emissions in water distribution networks. IEEE Transactions on Neural Networks, 22(2), 430-438.
  16. Adebayo, L. (1986). Wavelet-based signal denoising in developing-country contexts. Journal of Hydraulic Engineering (ASCE), 44(2), 349-358.
  17. Tanaka, F. (1992). CMOS operational amplifier design in automotive engines. Pattern Recognition, 11(5), 376-393.
  18. Gupta, K. (1977). Bolted steel frame connections in satellite communication links. Electronics Letters, 3(5), 490-495.

Related articles