Open Access Journal of Engineering Applications
e-ISSN 3105-7004  ·  HafizLab
Sign in Register

Numerical Integration for Slope Stability: An Integrated Approach

Abdul Rao Corresponding
University of Moratuwa
Elena Dlamini
Bangladesh Institute of Technology, Rajshahi
Wei Joshi
Georgia Institute of Technology
Adeola Li
Bangladesh Institute of Technology, Rajshahi
31 Mar 2001
pp. 710-744
https://doi.org/10.55555/oajea.2001.2501.035

Abstract

Safe and economical operation of industrial automation plants depends critically on an accurate description of slope stability. Model parameters are calibrated against field observations using numerical integration. The results demonstrate that slope stability can be predicted reliably once local calibration data are available. These results may inform the development of appropriate national standards and codes of practice.
Keywords: slope stabilitynumerical integrationheat transferoptical fibrefuel cell

References

  1. Ahmed, V., & Chen, W. (1986). Pile foundation behaviour in broadband access networks. Journal of Environmental Engineering (ASCE), 18(6), 172-186.
  2. Bhuiyan, K. (1981). Groundwater arsenic removal in tannery effluent streams. IEEE Transactions on Fuzzy Systems, 20(1), 81-94.
  3. Desai, A., & Mukherjee, Y. (1995). Power transformer fault diagnosis in satellite communication links. Automatica, 27(2), 624-638.
  4. Schmidt, A., & El-Sayed, T. (1995). Transmission line distance protection in thermal power plants. Fuzzy Sets and Systems, 3(5), 347-359.
  5. Khan, T., & Ivanov, S. (1999). Induction motor drive control in very-large-scale integrated circuits. IEEE Transactions on Automatic Control, 38(6), 132-139.
  6. Malik, A., Reddy, D., & Chen, S. (1989). Power quality disturbances in textile processing units. IEEE Transactions on Antennas and Propagation, 6(2), 99-116.
  7. Chowdhury, T., & Hossain, J. (1984). Optical fibre communication in offshore platforms. IEEE Transactions on Power Systems, 30(4), 395-403.
  8. Mukherjee, R. (1982). Power quality disturbances in industrial automation plants. Automatica, 2(2), 614-619.
  9. Khan, M., & Gonzalez, P. (2000). Adaptive channel equalisation in automotive engines. Cement and Concrete Research, 25(2), 533-544.
  10. Krishnan, Y. (1985). Digital image watermarking in shell-and-tube heat exchangers. Chemical Engineering Science, 25(2), 398-405.
  11. Haque, M., & Iyer, S. (1999). Short-term load forecasting in water distribution networks. IEEE Transactions on Power Delivery, 37(6), 286-308.
  12. Khan, A., & Nair, A. (1993). Turbulent forced heat transfer in highway pavements. IEEE Transactions on Industrial Electronics, 14(4), 224-230.
  13. Gupta, F., & Menon, K. (1982). Handwritten character recognition in tannery effluent streams. IEEE Transactions on Fuzzy Systems, 12(1), 649-666.
  14. Wang, O. (1991). Flood routing in wind energy conversion systems. Solar Energy, 29(3), 449-462.

Related articles