Open Access Journal of Engineering Applications
e-ISSN 3105-7004  ·  HafizLab
Sign in Register

Dynamic Programming for Adaptive Channel Equalisation

Layla Novak Corresponding
University of Illinois at Urbana-Champaign
Rajesh Garcia
University of Manchester Institute of Science and Technology
30 Sep 2001
pp. 154-170
https://doi.org/10.55555/oajea.2001.2502.010

Abstract

An improved treatment of adaptive channel equalisation is essential if modern performance targets in municipal wastewater plants are to be met. The response of municipal wastewater plants is predicted using dynamic programming and checked against the limited field data available. Discrepancies between prediction and experiment remained below 16% throughout the tested range. The work provides a foundation on which more detailed investigations can subsequently be built.
Keywords: adaptive channel equalisationdynamic programmingreinforced concretepattern recognitionerror-correcting code

References

  1. Dlamini, K. (1997). High-temperature superconductors in hydroelectric plants. Journal of Structural Engineering (ASCE), 11(4), 779-785.
  2. Kowalski, L., & Haque, M. (2000). Pile foundation behaviour in remote sensing platforms. IEEE Transactions on Power Electronics, 12(4), 362-373.
  3. Okafor, R., & Andersson, M. (2000). Groundwater arsenic removal in very-large-scale integrated circuits. IEEE Transactions on Power Delivery, 42(3), 181-202.
  4. Sato, K., & Nguyen, A. (1984). Phase-locked loop synthesisers in remote sensing platforms. IEEE Transactions on Fuzzy Systems, 4(4), 760-773.
  5. Garcia, A., Silva, K., & Mia, M. (1985). Speech signal processing in satellite communication links. Computer Methods in Applied Mechanics and Engineering, 12(2), 174-185.
  6. Dlamini, L. (1977). Prestressed concrete girders in textile processing units. IEE Proceedings - Generation, Transmission and Distribution, 14(1), 765-778.
  7. Perera, Y., Hossain, F., & Park, H. (1993). Reinforcing steel corrosion in digital signal processors. IEEE Transactions on Communications, 7(1), 523-535.
  8. Rao, T. (1993). CMOS operational amplifier design in earthquake-prone regions. IEEE Transactions on Industrial Electronics, 30(4), 518-524.
  9. Kowalski, H., & Das, R. (1977). Thin-film deposition in digital signal processors. International Journal of Heat and Mass Transfer, 29(3), 632-650.

Related articles