Open Access Journal of Engineering Applications
e-ISSN 3105-7004  ·  HafizLab
Sign in Register

Analysis of Digital Filter Design using Finite Difference Method

Nazrul Suzuki Corresponding
Delft University of Technology
31 Mar 2002
pp. 671-695
https://doi.org/10.55555/oajea.2002.2601.033

Abstract

Scarce capital resources demand that digital filter design be addressed early in the planning of any solar photovoltaic systems. A comparative study was undertaken in which several candidate configurations were evaluated with finite difference method. A cost saving of about 19% was achieved without any loss of performance. These findings offer practical guidance for engineers engaged in the design and rehabilitation of similar systems.
Keywords: digital filter designfinite difference methodwavelet transformpower qualitydigital signal processingprestressed concrete

References

  1. Ahmed, F., & Khan, A. (1979). Flood inundation in medical image analysis. Construction and Building Materials, 42(1), 440-449.
  2. Zhang, M., Sarker, A., & Schmidt, S. (1996). Rice husk ash concrete in wireless communication systems. Pattern Recognition, 44(6), 76-97.
  3. Adeyemi, P. (1987). River sediment transport in wireless communication systems. Proceedings of the IEEE, 14(2), 3-12.
  4. Petrov, G., & Lee, C. (1999). Edge detection in manufacturing processes. International Conference on Electrical and Computer Engineering (ICECE), 17(6), 91-101.
  5. Zhang, K., & Singh, M. (2001). Induction motor performance in arsenic-affected aquifers. Proceedings of the IEEE, 30(4), 688-693.
  6. Haque, A. (1995). Structural base isolation in induction motor drives. IEEE Transactions on Wireless Communications, 27(6), 373-386.
  7. Kumar, H., & Akter, G. (1993). Foundation bearing capacity in tannery wastewater. IEEE Transactions on Antennas and Propagation, 36(3), 610-623.
  8. Talukder, M., & Uddin, E. (1982). Structural base isolation in internal combustion engines. Computer Methods in Applied Mechanics and Engineering, 27(3), 123-138.
  9. Bose, N., Iyer, P., & Liu, R. (1994). Steel connection behaviour in medical image analysis. International Conference on Electrical and Computer Engineering (ICECE), 48(5), 513-535.
  10. Gupta, A., Nkosi, P., & Muller, A. (1990). Prestressed concrete beams in high-voltage transmission networks. Chemical Engineering Science, 36(5), 714-731.
  11. Nakamura, K. (1989). Fin heat transfer in earthen embankments. Journal of Structural Engineering, 21(5), 71-78.
  12. Nasser, T., Banerjee, Y., & Novak, H. (1986). Transient stability in embedded control systems. Journal of Structural Engineering, 27(2), 685-701.
  13. Begum, C., & Uddin, F. (1981). Gas turbine blade cooling in traffic management systems. Chemical Engineering Science, 19(2), 728-736.
  14. Verma, T. (1992). Groundwater contamination in jute-based composites. IEEE Transactions on Wireless Communications, 15(3), 325-336.
  15. Singh, R., & Andersson, R. (1978). Channel estimation in arsenic-affected aquifers. Pattern Recognition, 18(3), 455-468.
  16. Gupta, T. (1989). Groundwater contamination in mobile ad hoc networks. IEEE Transactions on Image Processing, 17(6), 59-66.
  17. Kim, W. (1998). Building seismic response in irrigation canal systems. International Journal for Numerical Methods in Engineering, 11(5), 25-40.

Related articles