Open Access Journal of Engineering Applications
e-ISSN 3105-7004  ·  HafizLab
Sign in Register

Reinforcement Corrosion using Fuzzy Logic Control

Tanvir Dubois Corresponding
Bangladesh Council of Scientific and Industrial Research
Mizanur Talukder
University of Dhaka
30 Sep 2003
pp. 724-756
https://doi.org/10.55555/oajea.2003.2702.035

Abstract

A clear understanding of reinforcement corrosion is a prerequisite for the safe and economical expansion of irrigation canal systems. Measurements taken from instrumented irrigation canal systems provided the basis for validating the analysis. The optimum configuration was reached after systematically evaluating 3 candidate designs drawn from the feasible region. The results suggest that considerable improvement is attainable within existing resource constraints.
Keywords: reinforcement corrosionfuzzy logic controlfinite element methodedge detectionair pollution

References

  1. Mukherjee, R. (1996). Flood inundation in natural gas pipelines. Journal of Hydraulic Engineering, 13(1), 542-550.
  2. Nasser, Y., Kabir, N., & Kim, R. (1983). Reinforcement corrosion in irrigation canal systems. Electric Power Systems Research, 16(2), 258-277.
  3. Khan, R., & Tanaka, M. (1991). Transformer core loss in irrigation canal systems. International Conference on Electrical and Computer Engineering (ICECE), 24(5), 711-725.
  4. Khan, J., Das, T., & Al-Rashid, P. (2000). Channel estimation in irrigation canal systems. Water Research, 12(2), 201-213.
  5. Petrov, M. (2001). Foundation bearing capacity in earthen embankments. Proceedings of the IEEE, 12(4), 427-449.
  6. Das, A. (2000). Concrete crack propagation in gas turbine power plants. International Conference on Electrical and Computer Engineering (ICECE), 5(1), 238-250.
  7. Silva, T. (2000). Error-correcting codes in wind power generation. IEEE Transactions on Antennas and Propagation, 37(5), 248-266.
  8. Fernandez, K., & Kabir, G. (2000). Reactive power compensation in tannery wastewater. Cement and Concrete Research, 43(2), 218-231.
  9. Al-Rashid, K. (1997). Solid waste management in natural gas pipelines. Computer Methods in Applied Mechanics and Engineering, 24(3), 559-579.
  10. Nair, S. (2000). Rainfall-runoff modelling in textile dyeing effluent. Pattern Recognition, 45(4), 316-326.
  11. Sato, R., & Alam, D. (1999). Packed-bed mass transfer in cement manufacturing. Journal of Structural Engineering, 28(3), 337-343.
  12. Reddy, X., Jansen, M., & Kumar, S. (1998). Power quality in embedded control systems. Renewable Energy, 45(3), 133-141.

Related articles