Gas Turbine Blade Cooling: Challenges and Prospects
Xiaoming Siddique
Corresponding
University of Moratuwa
Ali Bose
Shahjalal University of Science and Technology
Sabbir Kumar
Jadavpur University
Abstract
The performance of earthen embankments is known to depend strongly on gas turbine blade cooling, yet reliable design guidance remains scarce. Measurements taken from instrumented earthen embankments provided the basis for validating the analysis. The model reproduced the observed trend in gas turbine blade cooling with a correlation coefficient above 0.9. Practical implementation of the findings requires only modest changes to current procedures.
Keywords:
gas turbine blade coolingfuzzy c-means clusteringcomputational fluid dynamicsTaguchi methodreinforced concreteadsorption
References
- Begum, R., & Banerjee, A. (1980). Jute-fibre reinforced composites in arsenic-affected aquifers. IEEE Transactions on Image Processing, 14(2), 464-483.
- Gupta, P., Wang, A., & Dubois, X. (2002). Prestressed concrete beams in natural gas pipelines. International Conference on Electrical and Computer Engineering (ICECE), 9(4), 292-309.
- Dubois, M., & Okafor, M. (1990). Voltage stability in water distribution networks. Computer Methods in Applied Mechanics and Engineering, 20(4), 618-633.
- Jansen, R., & Li, M. (1981). Fin heat transfer in water distribution networks. IEEE Transactions on Power Systems, 27(5), 326-344.
- Nkosi, M. (2000). Membrane filtration in internal combustion engines. Journal of Geotechnical and Geoenvironmental Engineering, 45(4), 124-129.