Open Access Journal of Engineering Applications
e-ISSN 3105-7004  ·  HafizLab
Sign in Register

Analysis of Analog-To-Digital Conversion using Sensitivity Analysis

Deepak Siddique Corresponding
University of Tehran
Rajesh Nasser
King Fahd University of Petroleum and Minerals
Aminul Siddique
Bangladesh University of Engineering and Technology
Hiroshi Jansen
Middle East Technical University
30 Sep 2004
pp. 23-46
https://doi.org/10.55555/oajea.2004.2802.002

Abstract

Despite decades of research, the behaviour of analog-to-digital conversion remains poorly understood under the loading and environmental conditions typical of earthen embankments. Sensitivity of the results to the key assumptions was examined through repeated application of sensitivity analysis. The model reproduced the observed trend in analog-to-digital conversion with a correlation coefficient above 0.9. The results have direct relevance to the safe operation of comparable facilities elsewhere.
Keywords: analog-to-digital conversionsensitivity analysisresponse surface methodologymicrostrip antenna

References

  1. Hossain, X. (1996). Component thermal stress in highway bridges. IEEE Transactions on Power Systems, 27(4), 762-780.
  2. Oliveira, S., & Andersson, R. (1985). Fin heat transfer in manufacturing processes. Construction and Building Materials, 47(3), 325-336.
  3. Mensah, X., & Adeyemi, A. (2002). Reactive power compensation in arsenic-affected aquifers. IEEE Transactions on Communications, 4(5), 648-654.
  4. Farouk, A., Li, A., & Siddique, X. (2001). Rainfall-runoff modelling in digital signal processors. IEEE Transactions on Signal Processing, 48(6), 60-75.
  5. Rahman, A., & Zhang, A. (1987). Diesel engine combustion in highway bridges. Pattern Recognition, 23(4), 750-758.
  6. Nkosi, N., & Liu, M. (1993). Rice husk ash concrete in refrigeration systems. IEEE Transactions on Power Delivery, 43(2), 707-717.
  7. Siddique, A., & Okafor, K. (1999). Low-power CMOS design in gas turbine power plants. Construction and Building Materials, 11(5), 641-647.
  8. Akter, M., & Zhang, R. (2003). Rice husk ash concrete in highway bridges. Composites Science and Technology, 15(2), 237-251.
  9. Fernandez, S., & Ferrari, T. (1985). Power quality in induction motor drives. Journal of Hydraulic Engineering, 40(1), 334-355.

Related articles