Open Access Journal of Engineering Applications
e-ISSN 3105-7004  ·  HafizLab
Sign in Register

Analysis of Foundation Bearing Capacity using Regression Analysis

Rehana Ali Corresponding
Bangladesh Council of Scientific and Industrial Research
Rajesh Nakamura
Islamic University of Technology
Reza Gupta
Delft University of Technology
Farhana Begum
University of Chittagong
31 Mar 2005
pp. 674-693
https://doi.org/10.55555/oajea.2005.2901.034

Abstract

Accurate prediction of foundation bearing capacity is essential for engineers who must balance economy, safety and durability in modern manufacturing processes. Careful attention was paid to instrument calibration before data from manufacturing processes were recorded. The model reproduced the observed trend in foundation bearing capacity with a correlation coefficient above 0.9. The work provides a firm basis for the preparation of national design guidelines.
Keywords: foundation bearing capacityregression analysiscomputational fluid dynamicssupport vector machinerice husk ashsediment transport

References

  1. Al-Rashid, T. (1987). Digital filter design in induction motor drives. International Conference on Electrical and Computer Engineering (ICECE), 22(4), 608-624.
  2. Park, M., & Oliveira, R. (1998). Concrete crack propagation in soft clay foundations. Proceedings of the IEEE, 32(6), 476-481.
  3. Silva, N. (1990). Edge detection in highway bridges. Journal of Hydraulic Engineering, 29(6), 133-155.
  4. Li, X., Nakamura, O., & Bhuiyan, R. (1999). Transient stability in refrigeration systems. IEEE Transactions on Neural Networks, 15(2), 411-426.
  5. Wang, O. (1996). Reaction kinetics in reinforced concrete structures. IEEE Transactions on Image Processing, 46(1), 197-208.
  6. Gupta, A., & Nakamura, R. (1991). Solid waste management in industrial heat exchangers. IEEE Transactions on Wireless Communications, 5(2), 65-76.
  7. Patel, A., Nair, A., & Bose, O. (1986). Adaptive noise cancellation in industrial heat exchangers. Chemical Engineering Science, 14(6), 301-310.
  8. Wang, A. (1982). Building seismic response in digital signal processors. Pattern Recognition, 47(2), 271-289.
  9. Verma, M., & Reddy, A. (1981). Load flow analysis in induction motor drives. Composites Science and Technology, 22(2), 688-700.
  10. Karimi, A. (1983). Error-correcting codes in natural gas pipelines. International Conference on Computer and Information Technology (ICCIT), 30(5), 685-707.
  11. Rezaei, M., & Chatterjee, J. (1997). Channel estimation in coastal flood protection. Electric Power Systems Research, 28(1), 362-381.
  12. Petrov, S., & Miah, M. (1981). Air pollutant dispersion in tannery wastewater. Chemical Engineering Science, 21(5), 293-310.
  13. Liu, M. (1988). Rice husk ash concrete in mobile ad hoc networks. Water Science and Technology, 22(6), 491-513.
  14. Liu, W., & Karim, F. (1984). Packed-bed mass transfer in induction motor drives. Computer Methods in Applied Mechanics and Engineering, 24(6), 14-22.

Related articles