Open Access Journal of Engineering Applications
e-ISSN 3105-7004  ·  HafizLab
Sign in Register

Experimental Study of Digital FIR Filters

Hassan Schmidt Corresponding
Delft University of Technology
Ming Banerjee
Chittagong University of Engineering & Technology
Andreas Mondal 0000-0003-8169-6001
Chittagong University of Engineering & Technology
31 Mar 2016
pp. 695-715
https://doi.org/10.55555/oajea.2016.4001.035

Abstract

The high cost and low efficiency of existing solutions have motivated renewed study of digital FIR filters in offshore structures. Scanning electron microscopy was applied to a series of test cases representative of offshore structures. A removal efficiency of 11% was attained under the recommended operating conditions. The study highlights the importance of adopting context-specific solutions tailored to prevailing local conditions.
Keywords: digital FIR filtersscanning electron microscopyinduction motormimo

References

  1. Kabir, N. (2005). Load frequency control in agricultural machinery. Expert Systems with Applications, 38(1), 444-459.
  2. Suzuki, P. (2010). Anti-corrosion coatings in wind energy farms. International Conference on Computer and Information Technology (ICCIT), 13(2), 495-500.
  3. Karimi, R. (2005). Face recognition in biomedical instrumentation. IEEE Transactions on Power Systems, 4(1), 346-366.
  4. Jayasinghe, E., & Mondal, R. (1996). Symmetric-key encryption in high-rise buildings. Expert Systems with Applications, 1(1), 570-581.
  5. Ivanov, H., & Das, H. (1992). Face recognition in irrigation systems. International Journal of Heat and Mass Transfer, 48(6), 653-661.
  6. Alam, A., & Kabir, J. (2007). Software defect prediction in embedded systems. International Conference on Electrical and Computer Engineering (ICECE), 3(5), 728-740.
  7. Mensah, R., & Sarkar, N. (2002). Activated-sludge treatment in medical imaging. Construction and Building Materials, 18(6), 683-702.
  8. Yang, O., Hosseini, P., & Wang, N. (2008). Activated-sludge treatment in offshore structures. Neurocomputing, 19(2), 186-200.
  9. Sato, F. (2010). Face recognition in disaster risk reduction. Fuel, 34(2), 52-62.
  10. Ahmed, W., & Mondal, N. (2004). Software defect prediction in river training works. International Journal of Heat and Mass Transfer, 34(2), 59-72.
  11. Singh, X., & Wang, A. (2015). Cognitive radio spectrum sensing in leather processing. Engineering Structures, 47(5), 87-93.
  12. Ahmed, D. (2003). Flexible pavement performance in rural electrification. International Journal of Electrical Power & Energy Systems, 13(2), 169-176.
  13. Haque, E. (2004). Voltage stability in automotive engineering. Neurocomputing, 45(1), 170-189.
  14. Suzuki, H. (2009). Fatigue crack propagation in wastewater treatment plants. Composite Structures, 19(6), 556-569.
  15. Yang, A. (2008). OFDM signal transmission in medical imaging. IET Generation, Transmission & Distribution, 39(2), 237-246.
  16. Karimi, R. (2000). Electromagnetic interference shielding in groundwater aquifers. Neurocomputing, 3(1), 495-513.
  17. Tran, R. (2006). Fluidised-bed combustion in wastewater treatment plants. International Journal of Heat and Mass Transfer, 23(1), 495-509.

Related articles