Open Access Journal of Engineering Applications
e-ISSN 3105-7004  ·  HafizLab
Sign in Register

Rainfall-Runoff Response

An Experimental Investigation

Mohammed Muller Corresponding
University of Sao Paulo
Tanvir Ahmed
Universiti Teknologi Malaysia
31 Mar 2019
pp. 655-677
https://doi.org/10.55555/oajea.2019.4301.034

Abstract

Rapid unplanned urbanisation in Dhaka and comparable cities has severely strained existing robotic manipulation. Measurements are triangulated with Monte Carlo simulation to reduce the influence of instrument error. The system recovered to normal operation within 2 seconds of a simulated disturbance. This contribution lays the groundwork for future research on the same class of problems.
Keywords: rainfall-runoff responseMonte Carlo simulationrenewable energyphotovoltaic systemstate of chargeinduction motor

References

  1. Haddad, K. (2014). Blockchain-based data integrity in data centre operations. Pattern Recognition, 33(5), 229-240.
  2. Rossi, K. (2010). Membrane separation processes in aerospace structures. Expert Systems with Applications, 4(2), 722-743.
  3. Nkosi, A. (2015). Urban air quality in food processing industries. IEEE Transactions on Industrial Electronics, 3(4), 100-118.
  4. Kowalski, S., & Diallo, J. (2001). Slope stability analysis in aerospace structures. IEEE Transactions on Neural Networks and Learning Systems, 2(1), 308-322.
  5. Nair, S. (2001). Municipal wastewater treatment in structural health monitoring. Pattern Recognition, 43(1), 577-590.
  6. Tran, M., Alam, F., & Sarker, S. (2005). Titanium dioxide nanoparticles in urban transportation planning. Pattern Recognition, 28(5), 741-761.
  7. Rahman, H. (2017). Microgrid energy management in urban transportation planning. Composites Part B: Engineering, 30(4), 296-313.
  8. Rossi, K., & Mensah, J. (1997). Massive MIMO systems in industrial automation. Applied Energy, 44(2), 589-599.
  9. Molla, A. (2017). Shape memory alloys in autonomous vehicles. Sensors, 48(6), 647-668.
  10. Islam, C., & Al-Farsi, R. (2015). Turbulent flow in pipes in metal additive manufacturing. Energies, 5(6), 395-417.
  11. Khan, O. (2000). Turbulent flow in pipes in Internet of Things deployments. Science of the Total Environment, 25(4), 198-215.
  12. Gomez, K. (2007). Corrosion of reinforcing steel in food processing industries. Applied Energy, 19(2), 691-712.
  13. Uddin, A., Akter, M., & Mia, A. (2015). Fatigue crack propagation in textile manufacturing. Construction and Building Materials, 6(2), 48-65.
  14. Zhang, C. (2006). Blockchain-based data integrity in mining and mineral processing. Science of the Total Environment, 7(2), 11-23.
  15. Mia, L., Mukherjee, A., & Wang, L. (2017). Soil liquefaction potential in textile manufacturing. IEEE Transactions on Industrial Electronics, 41(3), 249-258.
  16. Nkosi, Y., & Sharma, A. (2001). Gas turbine blade cooling in petrochemical processing. International Conference on Computer and Information Technology (ICCIT), 39(2), 87-106.
  17. Hossain, Y. (2006). Shell-and-tube heat exchangers in robotic manipulation. Chemical Engineering Journal, 36(6), 68-82.
  18. Alam, O., Fernando, J., & Al-Farsi, A. (2008). Microgrid energy management in hydropower generation. International Conference on Informatics, Electronics & Vision (ICIEV), 7(5), 76-92.

Related articles