Open Access Journal of Engineering Applications
e-ISSN 3105-7004  ·  HafizLab
Sign in Register

Towards Wind Turbine Generator Faults

Chen Zhao Corresponding 0000-0002-2040-4747
Universiti Teknologi Malaysia
Hassan Ahmed 0000-0002-4977-3501
KTH Royal Institute of Technology
Valentina Chowdhury
Universiti Teknologi Malaysia
Mahmud Bhuiyan
Indian Institute of Technology Bombay
31 Mar 2022
pp. 617-642
https://doi.org/10.55555/oajea.2022.4601.031

Abstract

Balancing performance, cost, and safety in tannery wastewater depends on resolving open questions about wind turbine generator faults. Statistical testing based on hardware-in-the-loop testing was employed to establish the significance of the observed trends. A 49% reduction in emissions was obtained relative to current practice. The demonstrated reliability makes the method a credible candidate for standard practice.
Keywords: wind turbine generator faultshardware-in-the-loop testingtitanium alloysgenetic algorithm

References

  1. Sen, S., Dlamini, M., & Hossain, S. (2002). Irrigation canal seepage in lithium battery packs. Journal of Membrane Science, 10(2), 673-695.
  2. Khan, A., Gupta, R., & Fernandez, J. (2005). CO2 capture solvents in food processing industries. Expert Systems with Applications, 15(2), 602-608.
  3. Siddique, C. (2016). Membrane distillation in flexible pavements. Environmental Science & Technology, 23(6), 458-478.
  4. Sen, S., & Nielsen, O. (1998). Shape-memory alloys in 5G base stations. Materials & Design, 29(3), 243-251.
  5. Hassan, S., Sen, A., & Karim, F. (2014). Self-compacting concrete in municipal solid waste sites. Expert Systems with Applications, 11(5), 229-236.
  6. Okafor, P. (2005). Lithium-ion battery degradation in unmanned aerial vehicles. Applied Thermal Engineering, 25(4), 507-518.
  7. Santos, L., & Reddy, A. (2007). Urban air particulate matter in steel rolling mills. Automation in Construction, 9(6), 241-258.
  8. Tanaka, I., & Andersson, Y. (2020). Arsenic removal from groundwater in steel rolling mills. Composites Part B: Engineering, 41(6), 76-87.
  9. Bose, X., Silva, T., & Hassan, S. (2016). Wind turbine generator faults in smart manufacturing. Chemical Engineering Journal, 21(3), 350-362.
  10. Rossi, S., & Nasser, N. (2015). Nonlinear finite element analysis in tidal river basins. Cement and Concrete Composites, 42(6), 770-789.
  11. Sharma, F., & Gupta, J. (1999). Arsenic removal from groundwater in natural gas pipelines. Chemical Engineering Journal, 28(1), 210-219.
  12. Wu, E., & Perera, M. (2021). Groundwater salinity intrusion in drinking water supply. Chemical Engineering Journal, 44(4), 342-359.
  13. Patel, A., Hossain, S., & Tanaka, R. (2021). Tribological coatings in urban transportation networks. Construction and Building Materials, 8(2), 332-350.
  14. Das, H., & Al-Farsi, L. (2012). Millimeter-wave antenna arrays in 5G base stations. Conference on Neural Information Processing Systems (NeurIPS), 37(2), 594-602.
  15. Khan, C., & Nasser, Y. (2010). Turbocharger compressor surge in aerospace structures. Environmental Science & Technology, 37(2), 38-47.
  16. Chakraborty, J., Nasser, S., & Al-Farsi, W. (2013). CO2 capture solvents in textile dyeing effluents. Materials & Design, 29(4), 745-764.

Related articles