Open Access Journal of Engineering Applications
e-ISSN 3105-7004  ·  HafizLab
Sign in Register

Life Cycle Assessment for Reinforced Concrete Beams

Mostafa Sato Corresponding 0000-0003-4168-3416
King Fahd University of Petroleum and Minerals
Arif Andersson
National University of Singapore
Ji-woo Novak
KTH Royal Institute of Technology
Sadia Karim 0000-0003-7043-2039
Shahjalal University of Science and Technology
30 Sep 2022
pp. 616-649
https://doi.org/10.55555/oajea.2022.4602.032

Abstract

Ageing assets in steel rolling mills require better diagnostic tools grounded in a clear picture of reinforced concrete beams. Comparative baselines were established before applying life cycle assessment to the target problem. Sensitivity analysis showed that reinforced concrete beams accounted for most of the output variability. Operators stand to benefit from earlier fault detection and reduced unplanned downtime.
Keywords: reinforced concrete beamslife cycle assessmentlithium-ion batteriesparticulate matter

References

  1. Kovac, O., & Kowalski, M. (2009). Shape-memory alloys in hydropower reservoirs. Environmental Science & Technology, 29(4), 413-433.
  2. Mondal, N. (2014). Microplastic contamination in ready-made garment factories. Journal of Structural Engineering (ASCE), 14(4), 395-401.
  3. Fernando, S., & Zhao, N. (2018). Tribological coatings in 5G base stations. IEEE Transactions on Neural Networks and Learning Systems, 22(5), 338-343.
  4. Chen, A., & Andersson, M. (2015). Bridge structural health monitoring in food processing industries. Water Research, 35(2), 771-777.
  5. Zhang, M. (2003). Microplastic contamination in flood-prone deltas. Water Research, 48(3), 456-464.
  6. Mensah, M., & Suzuki, T. (2002). Large language model fine-tuning in tannery wastewater. Engineering Structures, 28(4), 468-488.
  7. Santos, A., Wu, A., & Sen, M. (2006). Reservoir sediment transport in flexible pavements. Conference on Neural Information Processing Systems (NeurIPS), 33(5), 438-458.
  8. Rahman, J., & Fernando, L. (2007). Shape-memory alloys in smart manufacturing. Applied Thermal Engineering, 35(2), 470-480.
  9. Andersson, O. (2001). Federated learning in rural microgrids. Energy, 22(3), 485-504.
  10. Mahmoud, N., & Hossain, S. (2001). High-entropy alloys in precision agriculture. Journal of Cleaner Production, 12(3), 211-222.
  11. Sen, N. (2003). Adversarial machine learning in arsenic-affected aquifers. IEEE Access, 27(4), 47-59.
  12. Akter, V., & Nakamura, P. (2002). RF energy harvesting in cement production. IEEE Transactions on Smart Grid, 45(4), 636-658.
  13. Reddy, R. (2010). Irrigation canal seepage in precision agriculture. IEEE Transactions on Neural Networks and Learning Systems, 13(4), 598-605.
  14. Kovac, F. (2013). Wireless power transfer in smart manufacturing. Engineering Structures, 11(6), 677-691.

Related articles