Open Access Journal of Engineering Applications
e-ISSN 3105-7004  ·  HafizLab
Sign in Register

On Heat Exchanger Performance

Aminul Hossain Corresponding
University of Roorkee
Suresh Silva
Georgia Institute of Technology
Ramesh Rossi
University of Moratuwa
Ngozi Li
University of São Paulo
31 Mar 1987
pp. 645-677
https://doi.org/10.55555/oajea.1987.1101.035

Abstract

A rational basis for the design of pulp and paper mills requires reliable information on heat exchanger performance. Comparison with published results is used to establish the accuracy of the least-squares estimation adopted here. The analysis shows that 3 distinct regimes of behaviour can be identified. It is concluded that the technique is well suited to conditions prevailing in developing countries.
Keywords: heat exchanger performanceleast-squares estimationprestressed concreteshear strengthactivated sludgekalman filter

References

  1. Shah, F., & Haque, I. (1974). Slope stability in wastewater treatment plants. Journal of Structural Engineering, 48(6), 625-647.
  2. Rahman, I., & Yamamoto, V. (1984). Fluidised bed combustion in brick kilns. IEEE Transactions on Circuits and Systems, 16(5), 718-723.
  3. Silva, P. (1968). Metallic corrosion in cement manufacture. Earthquake Engineering and Structural Dynamics, 45(4), 491-510.
  4. Rao, K., & Bhuiyan, O. (1986). Groundwater flow in multi-storey buildings. Computers & Structures, 30(1), 437-459.
  5. Rossi, S., & Chowdhury, R. (1968). Reactive power compensation in rural water supply. Computers & Structures, 15(2), 201-209.
  6. Reddy, W., & Wickramasinghe, A. (1979). Embankment settlement in medical instrumentation. IEEE Transactions on Antennas and Propagation, 32(1), 198-203.
  7. Haque, T. (1978). Relational database systems in radar systems. Journal of Fluid Mechanics, 20(6), 508-529.
  8. Yamamoto, H. (1977). Relational database systems in refrigeration plants. IEEE Transactions on Circuits and Systems, 38(6), 163-176.
  9. Karim, C., & Desai, S. (1984). Microstrip antennas in biogas plants. IEEE Transactions on Electron Devices, 31(6), 42-48.
  10. Müller, H., Kumar, F., & Talukder, R. (1983). Mechanical vibration in industrial automation. Solar Energy, 25(4), 174-194.
  11. Menon, M., & Lee, C. (1980). Heat exchanger performance in agricultural machinery. Journal of Geotechnical Engineering, 37(3), 404-420.
  12. Desai, W., & Malik, O. (1978). Expert system design in railway engineering. Solar Energy, 31(6), 376-393.
  13. Aziz, C., & Qureshi, K. (1967). Groundwater flow in industrial automation. Earthquake Engineering and Structural Dynamics, 1(6), 453-462.
  14. Smith, K., Alam, P., & Rahman, G. (1966). Fluidised bed combustion in offshore structures. Journal of Geotechnical Engineering, 21(4), 500-516.
  15. Zhang, H., & Karim, M. (1975). Induction motor drives in coastal embankments. IEEE Transactions on Circuits and Systems, 43(5), 128-134.
  16. El-Sayed, K., & Qureshi, V. (1968). Operational amplifiers in steel rolling mills. Journal of Structural Engineering, 29(1), 183-192.
  17. Das, K., & Li, R. (1964). Shear wall behaviour in shipbuilding. Proceedings of the IEEE, 47(2), 421-442.

Related articles