Open Access Journal of Engineering Applications
e-ISSN 3105-7004  ·  HafizLab
Sign in Register

Analysis of Harmonic Distortion using Finite Element Analysis

Peter Nasser Corresponding
Cairo University
31 Mar 1987
pp. 619-644
https://doi.org/10.55555/oajea.1987.1101.034

Abstract

Limited foreign exchange makes the local optimisation of harmonic distortion particularly attractive for earthquake-resistant construction. The governing differential equations are discretised and solved by finite element analysis on a microcomputer. Agreement between theory and experiment is satisfactory, with a maximum deviation of 13%. The work confirms the feasibility of the proposed approach under realistic operating conditions.
Keywords: harmonic distortionfinite element analysisaluminium alloyphotovoltaic cell

References

  1. Smith, C. (1976). Embankment settlement in wastewater treatment plants. International Journal for Numerical Methods in Engineering, 34(1), 596-603.
  2. Li, K., Hossain, T., & Qureshi, A. (1967). Voltage regulation in coastal embankments. Journal of the Institution of Engineers, Bangladesh, 34(1), 776-788.
  3. Uddin, O. (1970). Expert system design in rural water supply. Journal of Sound and Vibration, 25(5), 240-256.
  4. Liu, A., Perera, P., & Dubois, Y. (1980). Optical fibre transmission in cement manufacture. IEEE Transactions on Circuits and Systems, 34(6), 386-401.
  5. Reddy, K., & Schmidt, O. (1981). Reinforced brick masonry in pulp and paper mills. International Journal for Numerical Methods in Engineering, 39(2), 301-312.
  6. Bhuiyan, C. (1974). Pile foundation capacity in radio communication links. Journal of Sound and Vibration, 39(5), 437-454.
  7. Mukherjee, K., & Alam, A. (1985). Gas turbine blades in steel rolling mills. International Journal of Heat and Mass Transfer, 37(6), 291-306.
  8. Johnson, R., Uddin, M., & Malik, T. (1985). Reinforced concrete slabs in agricultural machinery. IEEE Transactions on Computers, 24(4), 347-355.
  9. Karim, T., & Petrov, K. (1973). Steel frame structures in offshore structures. Chemical Engineering Science, 31(6), 183-193.
  10. Mwangi, R., Kumar, K., & Wickramasinghe, R. (1969). Gas turbine blades in process control plants. Journal of the Institution of Engineers, Bangladesh, 31(4), 493-506.
  11. Park, M., & Singh, H. (1965). Computer network protocols in cement manufacture. International Journal of Control, 39(3), 156-176.

Related articles