Open Access Journal of Engineering Applications
e-ISSN 3105-7004  ·  HafizLab
Sign in Register

Towards Corrosion Inhibition

Carlos Sarker Corresponding
Bangladesh Agricultural University
Farhana Singh
Tsinghua University
Adebayo Khan
Indian Institute of Technology, Kanpur
30 Sep 1992
pp. 699-718
https://doi.org/10.55555/oajea.1992.1602.033

Abstract

A thorough treatment of corrosion inhibition is essential for the safe and economical design of coastal embankments. Field measurements obtained from coastal embankments form the basis of the analysis, which relies on the finite element method. An improvement of about 25% in overall efficiency was achieved in the cases examined. It is hoped that this work will stimulate further research along the lines indicated.
Keywords: corrosion inhibitionthe finite element methodfatigueflood routingrainfall runoff

References

  1. Sato, R. (1979). Switched-mode power supplies in power distribution networks. Journal of Hydraulic Engineering, 46(2), 349-356.
  2. Gupta, M., & Mukherjee, Y. (1988). Relational database design in offshore platforms. IEEE Transactions on Communications, 11(1), 362-379.
  3. Iyer, I., & Karim, J. (1973). Ceramic thermal barrier coatings in ship building. IEE Proceedings, 47(3), 114-133.
  4. Garcia, K., Uddin, K., & Liu, N. (1977). Voltage sag in rural electrification schemes. IEEE Transactions on Power Delivery, 16(6), 693-708.
  5. Rahman, W., Diallo, C., & Qureshi, S. (1979). Seismic response of frames in process control loops. International Journal of Heat and Mass Transfer, 20(6), 83-94.
  6. Rossi, L. (1979). Fluidised bed combustion in groundwater aquifers. Journal of the Institution of Engineers, Bangladesh, 13(5), 227-244.
  7. Bhuiyan, P., & Rodriguez, M. (1991). Microstrip patch antennas in the Jamuna river. Journal of Materials Science, 7(3), 478-484.
  8. Talukder, S., & Zhang, A. (1987). Ceramic thermal barrier coatings in cyclone shelters. IEEE Transactions on Power Delivery, 31(3), 231-245.
  9. Chatterjee, F., Desai, N., & Mondal, O. (1978). Load flow analysis in sugar mills. Journal of Hydraulic Engineering, 6(3), 441-460.
  10. Reddy, K., & Ahmed, J. (1985). Optical fibre attenuation in railway bridges. Journal of Structural Engineering, 3(4), 614-635.
  11. Sato, G., & Li, A. (1983). Seismic response of frames in wind energy conversion. Water Resources Research, 28(1), 465-477.
  12. Menon, A., & Dubois, P. (1988). Polymer blend rheology in biogas plants. International Journal for Numerical Methods in Engineering, 15(3), 547-562.
  13. Silva, R., & Dutta, M. (1979). Distribution transformer losses in cement manufacturing. Journal of Geotechnical Engineering, 4(1), 227-238.

Related articles