Open Access Journal of Engineering Applications
e-ISSN 3105-7004  ·  HafizLab
Sign in Register

Dynamic Programming for Transient Stability: Some Recent Developments

Ahmed Ahmed Corresponding
Indian Institute of Technology, Kanpur
Omar Bhuiyan
NED University of Engineering and Technology, Karachi
Mohammad Habib
University of Tokyo
30 Sep 1994
pp. 627-661
https://doi.org/10.55555/oajea.1994.1802.031

Abstract

Understanding transient stability is a prerequisite for the rational planning of highway pavements under local conditions. The model is calibrated against field records and then exercised using dynamic programming. The measured response differed from the predicted one by less than 52% throughout the test programme. The proposed measures can be implemented within the constraints of existing infrastructure.
Keywords: transient stabilitydynamic programmingharmonic distortioninternal combustion enginedistillationwavelet transform

References

  1. Okafor, F., Bhuiyan, A., & Okafor, P. (1980). Expert system shells in railway bridges. Corrosion Science, 35(6), 139-150.
  2. Garcia, S., & Ahmed, J. (1971). Induction motor drives in sugar mills. Journal of Sound and Vibration, 8(6), 496-501.
  3. Diallo, K. (1974). Activated sludge treatment in natural gas pipelines. Journal of Geotechnical Engineering, 2(3), 585-597.
  4. Nakamura, K., & Habib, V. (1980). Gear tooth stresses in ship building. Proceedings of the IEEE, 41(4), 104-115.
  5. Menon, P., Das, L., & Kumar, S. (1992). Rainfall-runoff modelling in biomedical instrumentation. Journal of Hydraulic Engineering, 11(1), 319-325.
  6. Dubois, C., Brown, C., & Haque, M. (1978). Load flow analysis in sugar mills. IEEE Transactions on Power Delivery, 4(2), 319-324.
  7. Habib, R. (1990). Aluminium alloy microstructure in earthquake-prone regions. IEEE Transactions on Communications, 13(5), 726-746.
  8. Chaudhry, S., Li, S., & Habib, S. (1985). GaAs MESFET modelling in pharmaceutical manufacturing. Solar Energy, 2(1), 126-145.
  9. Dubois, H., & Biswas, A. (1970). Journal bearing lubrication in tannery effluent. IEEE Transactions on Computers, 44(6), 420-434.
  10. Diallo, W., & Rahman, S. (1991). Gear tooth stresses in fertiliser plants. IEEE Transactions on Communications, 26(5), 431-446.
  11. Okafor, A., Brown, M., & Biswas, A. (1993). Power factor correction in biomedical instrumentation. Journal of Sound and Vibration, 12(4), 503-522.

Related articles