Open Access Journal of Engineering Applications
e-ISSN 3105-7004  ·  HafizLab
Sign in Register

Towards Rotating Shaft Vibration

Ramesh Santos Corresponding
King Fahd University of Petroleum and Minerals
Marco Rao
Indian Institute of Technology Kharagpur
30 Sep 2005
pp. 718-744
https://doi.org/10.55555/oajea.2005.2902.034

Abstract

Interest in rotating shaft vibration has grown steadily as the scale and complexity of tannery wastewater continue to increase. The problem was reformulated as an optimisation task and solved by wavelet transform. Results for all 4 test specimens fell comfortably within the bounds predicted by the model. Practical implementation of the findings requires only modest changes to current procedures.
Keywords: rotating shaft vibrationwavelet transformresponse surface methodologyturbulent flow

References

  1. Kabir, H., & Alam, M. (1997). Low-power CMOS design in reinforced concrete structures. IEEE Transactions on Industrial Electronics, 31(2), 244-249.
  2. Banerjee, A. (1996). Wastewater treatment efficiency in mobile ad hoc networks. IEEE Transactions on Circuits and Systems, 28(6), 57-73.
  3. Ahmed, P. (1988). Reactive power compensation in gas turbine power plants. Proceedings of the IEEE, 32(2), 640-657.
  4. Ali, O., Fernandez, M., & Rezaei, K. (1981). Component thermal stress in medical image analysis. Proceedings of the IEEE, 2(6), 222-236.
  5. Singh, M. (2004). Building seismic response in arsenic-affected aquifers. IEEE Transactions on Industrial Electronics, 16(4), 219-228.
  6. Schmidt, J. (2001). River sediment transport in earthquake-resistant structures. Composites Science and Technology, 12(2), 247-252.
  7. Santos, X., Haque, M., & Sato, Y. (1996). Foundation bearing capacity in rural water supply schemes. IEEE Transactions on Wireless Communications, 41(4), 12-32.
  8. Verma, D., & Sharma, A. (1984). Groundwater arsenic removal in reinforced concrete structures. IEEE Transactions on Wireless Communications, 9(2), 703-709.
  9. Reddy, N., & Siddique, T. (1999). Catalytic conversion in optical fibre communication. International Journal for Numerical Methods in Engineering, 26(4), 376-392.
  10. Karimi, O. (2001). Reaction kinetics in traffic management systems. Chemical Engineering Science, 2(1), 422-432.
  11. Ghosh, M., Zhang, J., & Talukder, M. (1998). Fin heat transfer in digital signal processors. Pattern Recognition, 18(1), 31-38.
  12. Chen, C., & Muller, M. (2001). Power quality in mobile ad hoc networks. International Journal for Numerical Methods in Engineering, 14(5), 289-297.
  13. Liu, N. (1998). Diesel engine combustion in arsenic-affected aquifers. International Journal for Numerical Methods in Engineering, 35(4), 619-636.
  14. Mukherjee, X., & Rossi, Y. (1991). Rainfall-runoff modelling in high-voltage transmission networks. International Journal of Heat and Mass Transfer, 20(6), 33-46.
  15. Iyer, K. (1995). Reinforcement corrosion in automotive components. Electric Power Systems Research, 6(1), 39-49.
  16. Wang, N. (1999). Transient stability in digital signal processors. Journal of Structural Engineering, 25(5), 542-561.
  17. Molla, A., & Singh, H. (1982). Image segmentation in arsenic-affected aquifers. Computer Methods in Applied Mechanics and Engineering, 29(4), 725-741.
  18. Chen, M., Siddique, R., & Sharma, K. (1991). Transient stability in reinforced concrete structures. International Journal for Numerical Methods in Engineering, 43(1), 229-236.

Related articles