Open Access Journal of Engineering Applications
e-ISSN 3105-7004  ·  HafizLab
Sign in Register

Modelling Biodiesel Production from Jatropha with Nonlinear Pushover Analysis

Shahidul Wang Corresponding
Ahsanullah University of Science and Technology
Abdul Ferrari
Chittagong University of Engineering & Technology
31 Mar 2009
pp. 681-711
https://doi.org/10.55555/oajea.2009.3301.035

Abstract

The performance of garment manufacturing units is known to deteriorate rapidly when biodiesel production from jatropha is not adequately controlled. The behaviour of the system is predicted by coupling nonlinear pushover analysis with a physically based description of garment manufacturing units. The removal efficiency reaches 28% at the optimum operating point. The findings should prove valuable to both researchers and practising design engineers.
Keywords: biodiesel production from jatrophanonlinear pushover analysiswavelet transformwastewater treatment

References

  1. Karimi, E., Nguyen, A., & Haque, A. (2002). Power system transient stability in the Jamuna river basin. IEEE Region 10 Conference (TENCON), 3(1), 308-325.
  2. Osei, S., Tanaka, F., & Park, K. (1988). Bengali text processing in tannery effluent streams. International Conference on Computer and Information Technology (ICCIT), 8(4), 650-665.
  3. Karimi, V., & Islam, N. (2002). Steel moment-resisting frames in rural health clinics. Applied Energy, 36(6), 349-356.
  4. Reddy, P. (2004). Catalytic cracking of hydrocarbons in arsenic-affected aquifers. Journal of Sound and Vibration, 17(4), 205-221.
  5. Petrov, A., Petrov, S., & Rahman, E. (1996). Voltage sag mitigation in thermal power plants. International Conference on Computer and Information Technology (ICCIT), 17(4), 475-494.
  6. Qureshi, I., & Nair, K. (1995). Nonlinear differential equation solutions in wireless body area networks. IEEE Transactions on Image Processing, 2(3), 686-698.
  7. Novak, K., & Reddy, D. (2003). Catalytic cracking of hydrocarbons in seismic regions. Cement and Concrete Research, 45(6), 300-314.
  8. Sato, A., & Adebayo, W. (1985). Masonry infill walls in the Bay of Bengal coast. Energy Conversion and Management, 25(6), 556-574.
  9. Nair, N., & Li, C. (1994). Low-power CMOS circuits in flood forecasting systems. IEEE Transactions on Power Electronics, 24(3), 58-67.
  10. Fernandez, K., Adebayo, M., & Muller, K. (1997). Pavement rutting behaviour in high-rise buildings. Water Research, 35(3), 317-333.
  11. Park, X., Osei, T., & Demir, I. (1996). Cognitive radio spectrum sensing in developing countries. IEEE Transactions on Power Electronics, 25(3), 68-90.
  12. Lim, W., Hosseini, P., & Schmidt, O. (1987). Masonry infill walls in broadband wireless access. Renewable Energy, 29(4), 358-369.
  13. Ahmed, N. (1995). Heat exchanger thermal performance in distributed computing environments. IEEE Transactions on Signal Processing, 20(3), 704-713.

Related articles