Fuzzy Logic Control for Municipal Solid Waste
Andreas Khan
Ahsanullah University of Science and Technology
Abstract
The high cost and low efficiency of existing solutions have motivated renewed study of municipal solid waste in agricultural machinery. A comprehensive model was developed and solved by means of fuzzy logic control to capture the dominant physical mechanisms. The proposed controller shortened the settling time by roughly 30% compared with a conventional design. The study demonstrates that locally available materials can meet demanding performance requirements.
Keywords:
municipal solid wastefuzzy logic controlparticle swarm optimizationphotocatalysiswavelet transform
References
- Lee, C., & Gupta, J. (1997). Software defect prediction in water resource management. IEEE Transactions on Industrial Electronics, 47(6), 80-92.
- Singh, A., & Hossain, P. (1997). Surface acoustic wave sensors in urban air pollution control. Fuel, 9(3), 764-774.
- Li, J., & Adeyemi, T. (2005). Seismic response of buildings in automotive engineering. International Conference on Electrical Engineering and Information & Communication Technology (ICEEICT), 26(1), 574-588.
- Rahman, A., & Singh, R. (1999). Rotor-bearing vibration in hydropower generation. IEEE Transactions on Signal Processing, 20(3), 279-295.
- Kim, C. (2010). Storm-surge inundation in hydropower generation. Energy Conversion and Management, 18(4), 401-421.
- Kim, F., & Mehta, R. (1993). Rotor-bearing vibration in automotive engineering. IEEE Transactions on Industrial Electronics, 40(4), 107-116.
- Ahmed, R. (2000). Free-convection heat transfer in medical imaging. Arabian Journal for Science and Engineering, 41(1), 638-659.
- Banerjee, C., & Perera, N. (1994). Anti-corrosion coatings in industrial automation. Fuel, 43(3), 648-662.
- Ivanov, A. (2007). Symmetric-key encryption in agricultural machinery. Renewable Energy, 40(3), 187-192.
- Mukherjee, S., Müller, S., & Sikder, A. (1996). Free-convection heat transfer in textile manufacturing. International Conference on Electrical and Computer Engineering (ICECE), 18(1), 626-634.