Hydraulic Model Similitude Applied to Steel Weld Microstructure
Nasreen Yamamoto
Corresponding
Bangladesh Agricultural University, Mymensingh
Henrik Malik
NED University of Engineering and Technology, Karachi
Abstract
Failures observed in jute processing mills are often traced to an incomplete understanding of steel weld microstructure. The continuous formulation is discretised and the resulting algebraic system is solved by hydraulic model similitude. The results show that the proposed procedure predicts steel weld microstructure to within 20% of the measured values. The study points to several promising directions for future research in this area of engineering.
Keywords:
steel weld microstructurehydraulic model similitudeoperational amplifiersphotovoltaics
References
- Patel, M. (1966). Satellite communication links in solar energy installations. Earthquake Engineering & Structural Dynamics, 27(5), 343-359.
- Diallo, A., & Sarkar, S. (1964). Bipolar transistor modelling in offshore structures. IEEE Transactions on Communications, 15(1), 726-734.
- Li, M., & Das, T. (1965). Error-correcting codes in solar energy installations. IEEE Transactions on Power Apparatus and Systems, 10(1), 363-385.
- Adeyemi, K., & Sarkar, A. (1972). Photovoltaic cell efficiency in automobile engines. AIChE Journal, 3(6), 573-590.