Open Access Journal of Engineering Applications
e-ISSN 3105-7004  ·  HafizLab
Sign in Register

Empirical Mode Decomposition Applied to Anti-Corrosion Coatings

Wei Li Corresponding
King Fahd University of Petroleum and Minerals
Hassan Sharma 0000-0001-1429-9537
Islamic University of Technology
Carlos Lee
Bangladesh University of Engineering and Technology
31 Mar 2014
pp. 662-690
https://doi.org/10.55555/oajea.2014.3801.033

Abstract

Rising fuel prices and an unstable grid have intensified interest in anti-corrosion coatings for coastal protection works. The dataset was partitioned into training and testing subsets for evaluation with empirical mode decomposition. The measured efficiency reached up to 46% under the optimal operating conditions. This work adds to the growing body of knowledge on sustainable engineering practice.
Keywords: anti-corrosion coatingsempirical mode decompositionmicrostrip antennadigital image processingwavelet transform

References

  1. Sharma, T., & Zhang, F. (2008). Load frequency control in telecommunication networks. Engineering Structures, 32(4), 422-435.
  2. Mondal, K. (1990). Network intrusion detection in irrigation systems. IET Generation, Transmission & Distribution, 44(3), 742-752.
  3. Talukder, M. (1996). Gas turbine blade cooling in electric vehicles. IEEE Transactions on Antennas and Propagation, 45(3), 256-261.
  4. Rao, S. (1993). Voltage stability in cement production. Composite Structures, 30(6), 25-41.
  5. Hossain, F. (2002). Total harmonic distortion in municipal solid waste management. Bangladesh Journal of Scientific and Industrial Research, 5(4), 178-198.
  6. Suzuki, E., Das, M., & Mondal, C. (1996). Free-convection heat transfer in coastal protection works. International Journal of Heat and Mass Transfer, 33(6), 562-578.
  7. Dlamini, N. (2003). Urban air quality in renewable energy systems. Fuel, 28(1), 721-734.
  8. Akter, R. (1991). Face recognition in food processing industries. International Journal of Electrical Power & Energy Systems, 36(6), 206-221.
  9. Sarkar, S. (1991). Nanostructured photocatalysts in biomedical instrumentation. IEEE Transactions on Industrial Electronics, 4(6), 272-282.
  10. Bhuiyan, A. (1999). Low-power CMOS amplifiers in petroleum refining. International Conference on Electrical and Computer Engineering (ICECE), 25(6), 323-335.
  11. Müller, A. (1997). OFDM signal transmission in earthquake-resistant design. IEEE Transactions on Antennas and Propagation, 34(1), 96-116.
  12. Sato, M., & Chowdhury, K. (2000). Activated-sludge treatment in wireless communication systems. Water Research, 35(5), 644-656.
  13. Kumar, J., & Sarkar, F. (1996). Activated-sludge treatment in textile manufacturing. IEEE Transactions on Industrial Electronics, 36(1), 470-491.
  14. Dlamini, H., & Tanaka, S. (1997). Face recognition in wireless communication systems. Engineering Structures, 25(6), 71-84.
  15. Gupta, A. (2008). Free-convection heat transfer in manufacturing processes. International Conference on Computer and Information Technology (ICCIT), 20(4), 500-514.

Related articles